Product Groups

Hedia

Mobile :

Tel :

Request a quote

Address：259 Ki Lung Street, Sham Shui Po, Kowloon，HongKong

Product Description

Reversible jaw pullers

Versatile and robust pullers for internal and external pulling jobs

The multi-purpose SKF Reversible Jaw Pullers are suitable for internal and external pulling of bearings and other components, such as gears and pulleys. The standard range of eight pullers can accommodate a wide range of bearing and component sizes. Adding extra versatility to the TMMR..F puller programme, the fLion Bearing Industrial Co.ltd largest sizes are also available with extra long arms as a standard option TMMR ….XL. The extra long arms help to dismount bearings and components placed far from the shaft end. For more versatility, the extra long arms can be further extended by adding extension pieces.

An essential and versatile tool for every workshop allows for external and internal pulling applications
Self-locking arms for easy adjustment of width of grip
Hexagonal head on beam enables rotation of puller and bearing during dismounting, improving ease of use
Wide gripping range from 23 mm 0.9 in. internal to 350 mm 13.8 in. external, enables many bearings and components to be dismounted
Unlike many similar pullers, the pullers can be used up to their full rated load capacity without permanently deforming the puller arms
Arms and beam are zinc passivated for enhanced corrosion resistance and easy cleaning
The extra long arm extension pieces, designed to be easy to fit and remove, can be used to further increase the effective arm length. Using extension pieces does not compromise the overall puller strength
The SKF Reversible Jaw Pullers can also be supplied in three different sets, complete with a workshop stand

External pull fig 1)
Internal pull fig 2
Reversible jaw puller TMMR.. F series fig 3
Reversible jaw puller TMMR.. XL series fig 4
Complete sets with pullers on a puller stand are also available fig 5

fig 1

fig 2

fig 3

fig 4

fig 5

Hexagonal head on beam enables rotation of puller and bearing during dismounting, improving ease of use. fig 6
Unlike many similar pullers, the spindle tip cone rotates. This:
- helps reduce the risk of shaft damage
- enhances stability
- helps reduce the applied torque to reach the required pulling force. fig 7
Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. fig 8
Extra long arm pullers have fixing screws to aid the initial positioning of the arms. When a pulling effort is applied, a self locking feature secures the arm position on the beam. fig 9
A unique retractable spring-loaded nose piece is supplied with the extra long arm pullers, which enhances the overall puller stability and safety. fig 10

fig 6

fig 7

fig 8

fig 9

fig 10

Dimensions
Designation	Width of grip External pull D		Width of grip Internal pull d		Effective arm length L
	mm	in.	mm	in.	mm	in.
TMMR 40F	23–48	0.9–1.9	59–67	2.3–2.6	67	2.6
TMMR 60F	23–68	0.9–2.7	62–87	2.4–3.4	82	3.2
TMMR 80F	41–83	1.6–3.3	95–97	3.7–3.8	98	3.9
TMMR 120F	41–124	1.6–4.9	95–139	3.7–5.5	124	4.9
TMMR 160F	68–164	2.7–6.5	114–163	4.5–6.4	143	5.6
TMMR 200F	65–204	2.6–8.0	114–204	4.5–8.0	169	6.7
TMMR 250F	74–254	2.9–10.0	132–254	5.2–10.0	183	7.2
TMMR 350F	74–354	2.9–13.9	135–354	5.3–13.9	238	9.4

TMMR 160XL	42–140	1.7–5.5	121–188	4.8–7.4	221*	8.7
TMMR 200XL	42–180	1.7–7.1	121–228	4.8–9.0	221*	8.7
TMMR 250XL	44–236	1.7–9.3	123–284	4.8–11.2	221*	8.7
TMMR 350XL	44–336	1.7–13.2	123–384	4.8–15.1	221*	8.7
* Arm length can be increased by a multiple of 125 mm with the arm extenders TMMR 16/35XL-4